Van Mark – TAT60 Trim A Table
Van Mark Trim-A-Table TAT60 siding saw table with a 6' boom and fully captured saw track for wider materials, sliding deck extensions, wing supports to 16", and up to 18' of material support.
Price on request
- Pickup in New Brunswick, NJ
- Delivery on our lift-gate truck · zones
- SKU MRT-VAN00011042
About this product
The TAT60 is the top model in Van Mark’s saw table line and the next step from the original TAT50. The main change is a 6′ boom and saw track assembly, a foot longer than the TAT50’s, which lets the saw cross wider material and cut sharper angles; Van Mark rates it for cuts as shallow as 2/12 pitch. Van Mark widened the table as siding materials got wider, so it suits wide siding, soffit and fiber cement.
The saw track fully captures 7″ to 8″ circular saws and has a quick drop-in feature, so the saw goes in and comes out fast (saw not included). Dual wing supports extend the working surface to 16″ for wide pieces, and sliding deck extensions support oversized panels, with up to 18′ of total material support. A dual-scale protractor reads degrees and pitch to either side, memory stops return the boom to a set angle, material stops set repeat lengths, and the rear fence adjusts or comes off. The track is recessed, so the blade never cuts the tabletop.
For transport the table folds to 8′ and breaks down so one person can move it. Legs are sold separately: the Steel Folding Legs for Trim-A-Table (part 3001) fit both the TAT60 and TAT50.
Pair it with the 3001 legs, a 7-1/4″ circular saw with a blade for the siding you cut, and a SureCut table for quick square cuts. It is made in the USA, and Van Mark covers it with a 1-year limited warranty. It is available from our New Brunswick, NJ warehouse; call (732) 561-4275 to check stock, or add it to your quote.
Specifications
| Manufacturer / model | Van Mark Trim-A-Table TAT60 |
|---|---|
| Boom | 6' saw track boom |
| Saw capacity | 7" to 8" circular saws (not included) |
| Working surface | Wing supports extend to 16" |
| Material support | Up to 18' |
| Folded length | 8' |
| Legs | 3001 steel folding legs, sold separately |
| Warranty | Van Mark 1-year limited |
| SKU | MRT-VAN00011042 |
Goes with it
Questions
What does the TAT60 add over the TAT50?
A 6' boom for wider materials, sliding deck extensions, and fully captured saw tracks with a quick drop-in feature.
Which legs fit it?
The Van Mark 3001 steel folding legs, which also fit the TAT50.